Taz 6 bed corners for magnetic bed
Description
If you need to secure the glass bed on your Taz without the additional thickness added by the PEI sheet at the corners, these feet are sized to get the bare glass in contact with the washers. I made them because I removed my gouged PEI and added a magnet sticker and flex steel build plate that has cutouts around the corners where the washers press against the glass. Since the height of the stock corner mounts are sized for the thickness of a 3.3mm plate of glass AND a PEI sheet, there is a gap with the stock bed corners These are sized for just the bare glass.
Statistics
Likes
1
Downloads
0