Samsung charger ground pin repair
Description
**This repair may be dangerous. The pin could snap off in the socket leaving the live and neutral pins exposed posing a hazard to children. Use this part at your own risk** The ground pin on my wife's Samsung Galaxy S7 fast charger broke. Thankfully the part was simple to draw up in Fusion 360. For the strongest print, use Tough PLA, ABS or another strong filament. Print with the flat side down and the shaft facing up. You want the layers perpendicular to the socket's holes. To install: 1. Unscrew the two T6 screws on the face of the charger and prise the faceplate from the body. It will come out from the top first. 2. Remove the ground pin and metal casing. The plastic pin can be slid out and replaced with the 3d printed part. 3. Replace the pin and housing and reverse step 1 to reassemble.
Statistics
Likes
2
Downloads
0