Heusinkveld Sprint Rumble Mod Brake and Throttle
Description
Support for adding a rumble motor to the heusinkveld sprint brake and throttle pedal. I use a PS3 controller rumble motor, but i pretty sure that xbox motor are the same size (here 26mm). In my case i wrap an adhesive tape around the motor to have it stuck with no vibration with 3d print. You need to remove the hex nut to be able to slide the motor mounts inside the brake pedal. !!! Be warned, it is difficult to push it in by hand, I used pliers to help me. Once pressed in, it does not move at all and the vibrations are well transmitted through the pedal. I really enjoy the feeling added, that's why I share it with you. You will need to make the rumble work : Arduino UNO Motor Shield v2 for arduino Power supply (i have 12v because i also have 2 fans on my motor shield board) Simhub software You'll find a lot of video on youtube to show you how to make that work ( it's exactly the same hardware than Wind simulator except that's a rumble motor and not a fan ;) ) (E.g. : https://www.youtube.com/watch?v=X2LS2IhGcdA&ab_channel=BoostedMedia ) Enjoy !
Statistics
Likes
23
Downloads
0