Shower holder
Description
Deutsch: Halter für Duschkopf passend für Ø25 mm Führungsstangen. Bitte als erstes "Schraube_test" und "Mutter" ausdrucken und prüfen, ob die Slicer Einstellungen für das Gewinde passen. .stl Dateien sind abgeleitet von CAD Modellen ohne Aufmaß oder Korrektur. (Tr 8x2 mm) ggf. "Horizontale Erweiterung für Bohrungen" Schraube und Mutter müssen ohne Kraftaufwand fügbar sein. Das Teil "Clamping_part" wie auf dem Bild zu sehen ist, ausrichten (Gewinde muss in XY-Ebene liegen). Keine Stützstruktur im Gewinde Für das Teil "Schraube" ein Infill von mindestens 60 % verwenden (optional von 0-15 mm geringeres Infill -> von 15-72 mm >=60% english: Holder for shower head suitable for Ø25 mm guide rods. Please print out "Schraube_test" and "Mutter.stl" first and check whether the slicer settings for the thread fit. .stl files are derived from CAD models without additional material or correction. (Tr 8x2 mm) if necessary use "Horizontal extension for holes" It need be possible to join the screw and nut without any effort. Align the part "Clamping_part" as shown in the picture (thread must be in the XY plane). No support in thread. Use an infill of at least 60% for the "screw" part (optionally from 0-15 mm lower infill -> from 15-72 mm> = 60%
Statistics
Likes
3
Downloads
0