Accessory Holder for drilling stand 25mm
Description
Accessory Holder for drilling stand 25mm I designed and created drilling accessory Holder for china Drill Stand Model 6117. (Original Column was only pipe diameter 25mm with wall only 1.1mm and this completely degrades the rigidity and is not very straight and so I replaced it with a precision linear rod SKF LJMS 25h6 L505mm ESSC1) - accessory holder directly on the stand with drilling-machine cable fixation for any column diameter 25mm - 4x hole for hex key (Inbus) size 6mm 5mm 4mm 3mm - 1x hole for chuck key 6mm - 2x hole for pin 5mm (for example marker for hole center) printed parts, material PETG: The printing orientation must be observed as show photo! (the design of the part is created with regard to the printing orientation) [layer height=0,20mm][Infill=70% Grid][vertical shells perimeters=3] JS_HolderAccessory-DrilStand25 purchased material: 1x ISO 4762 Hexagon socket head cap screw M4x16 1x ISO 4032 Hexagon nut M4 Tip: For tune the optimal tightness of the hex key hold it is enough to redrill lightly with a drill of a suitable diameter, then the hex key hold not too tightly or loosely.
Statistics
Likes
3
Downloads
0