Monitor Stand 13,3" Wimaxit M1331C
Description
## Monitor Stand 13,3" I dont now why but the old bolt and grapel doesn´t fit in 70% but in 60%. I made the bolt end thicker and longer. Now it fits perfect. ### The Orginal made by Bit_Draftet https://www.thingiverse.com/thing:2956836 ### NEW features * NEW bolt * fits in small 3D printers Stand 70% smaller * mirrored. grapel and bolt in 60% ### Update 05.12.2020 **The Bolt broke!!** Now I use two M8 nuts with a washer an a 40mm M8 thread. I works perfekt. ### the Design 13,3" Holder ist for 12mm thin Wimax monitor or smaller ones (a taabelt or something). You should print it with Suport . But try not to get any support on the holding drum (connector to the stand) The print time will be around 14h . I recommend different nozzels, but i think you could print it with a 0.4 nozzle. ### Print Details **WIMAXIT Holder** * Layer Hight: 0.2 * Nozzle: 0.4 * Wall Line Count 3 * Infill 60% * Supports:Yes * Adhesion: yes * 6h **Bolt** * Layer Hight: 0.12 * Nozzle: 0.3 * Wall Line Count 3 * Infill 60% Cubic * Supports: NO * Adhesion: yes * 49 min **Grapel** * Layer Hight: 0.12 * Nozzle: 0.3 * Wall Line Count 3 * Infill 60% cubic subdivision * Supports: yes - touching buildplate * Adhesion: yes * 35 min **Monitor Base** * Layer hight: 0.32 * Nozzle: 0.6 * Wall line count: 2 * Infill: 35% cubic subdivision * Supports: NO * Adhesion: yes * 8h **PLA** Creality Ender 3
Statistics
Likes
4
Downloads
0