Computrainer Rocker
Description
My Computrainer Rocking design for indoor training. I've been doing a lot indoor riding on Zwift lately and my behind is starting to hurt with the longer rides (1hr+). So after seeing some minimalistic designs for other trainers, I decided to make one for mine. This is what I came up with using what I have. V1 was just the middle pivot and using the plastic feet to mount the dampers. Worked ok, but it had some movement, but worked for me. I added the damper mounts so that I can move the mounts inward more (I used the knurled knobs and the nut thread from akira3dp0's design; https://www.thingiverse.com/thing:1460364) Added the 20mm bolt as a convenience. I will be doing a ride later and post a video of it when I get a chance. I updated the damper mounts with V2 as the first one had the threads in the wrong direction. Removed the old one. Update - 22NOV2020 I realized that I need to adjust the height of the damper mounts as the floor isn't level. So I added adjustable knobs so that it is leveled before I put dampers. Printing them out now and will add pictures when done.
Statistics
Likes
1
Downloads
0