Valorant Vandal Assault Rifle
Description
#Valorant Assault Rifle *EDIT (5/2/2021): At the request of user _Malphas, I have added a detachable version of the magazine assembly with included bullet slot. Use foam tape or any other flexible material and adhere it to the inside of Magazine_assembly_1 where the magazine contacts the sides. This should hold the magazine in place with friction. This revision is not tested so please perform the necessary tolerance checks.* *EDIT (26/11/2020): Fixed the error in scale for Frame_Sight. Please ensure you print the updated version.* This is a 1:1 fully scaled static prop replica of the vandal assault rifle inspired by Riot's Valorant. Comes in several easy to print parts, requiring minimal supports and rafts. Connectors can be used to align parts together for easy assembly (I recommend using a strong adhesive such as super glue). Printed and tested to work. Requires approximately 1 to 1.5 kg of filament depending on scale and infill. I recommend printing at 0.2mm layer height and 15% infill. --- #*DISCLAIMER: This model is under the Creative Commons Attribution-NonCommercial-NoDerivs 2.5 Generic (CC BY-NC-ND 2.5) Licence. Strictly no sale of the models or its printed parts is allowed!*
Statistics
Likes
125
Downloads
0