SKR 1.4 Case for PRUSA I3 Frames
Description
2021-05-29 Update: - Added hinges and mounts for Bear upgrade frame 2021-04-10 Update: - I have created an additional design to house typical 25A mosfet board, the spacing between the screwholes are 4,25mm and 5,25mm - Modified the base version also, moved the heatbed cable holder lower to fit better with the SKR 1.4 board and replaced the MK2.5S cable holder design with the MK2S older one, as it is easier to print and does the job just as well. - On both designes I have adjusted the USB - SD-CARD port cutouts, also added a cutout for the ESP-01s wifi module Remix of the *NOAMi3 SKR 1.3* case for the Prusa i3 *MK2S* and *MK2.5* frames. It is resized to fit the SKR 1.4 board, there is 0.2mm difference in the screw hole spacing for the board mounting For this you need to print the cable clips from the MK2.5 repo: https://github.com/prusa3d/Original-Prusa-i3/blob/MK2.5/Printed-Parts/stl/Rambo-extruder-cable-clip.stl https://github.com/prusa3d/Original-Prusa-i3/blob/MK2.5/Printed-Parts/stl/Rambo-heatbed-cable-clip.stl Please check out also NOAMi3 github project, its actually awesome stuff if you are into building an i3 clone: https://github.com/numberformat/noami3
Statistics
Likes
7
Downloads
0