GPU Power Track
Description
GPU Power Cable Track: Designed for a mATX motherboard with a RTX 3070 FE in the first PCIe slot. Designed to be assembled around the GPU power cable with two 6mm M3 self tapping screws though longer bolts can be used and if you widen the wholes on the "Plate" slightly (1.75mm -> 2.5mm) you could drive in M3 machine bolts without adding threads or a nut to the end. Was designed to 'float' (no mounting option to the case) as there was no mounting option near its intended location and it 'floats' in the correct location for me. Requires ~15mm of clearance passed the motherboard and 3mm clearance under the motherboard. This design fits the provided coupler with the RTX 3070 that converts from 8pin to nvidia's 12pin power. THIS WILL INTERFIER WITH A SECOND FULL SIZE PCIE CARD. Printed in PTEG at 0.15mm layer height with supports on a Prusa Mini (Not the MK1 but thingiverse doesnt have the mini as a drop down option)
Statistics
Likes
4
Downloads
0