Ender 3 V2 Drawer (Screen + PI3 / PI4 + Storage)
Description
Please click like if you like the design :) ==================== This Ender 3 V2 drawer will fit a Raspberry PI4 or PI3, Enders 3 V2's screen, 40mm fan powered by the PI and a small storage space in front, its going to be a tight fit i want this not to wobble, only two parts, the drawer and the lid, no screws, has perfect fitting for the displays wide cable and the connection to the printers USB port for the PI. Parts: ==================== 1. Quite 40mm Noctua fan (5V version which the PI will power): https://amzn.to/3nJ2t1a 2. Power your PI4 directly from your PSU with step down converter: https://amzn.to/3nNMYoN Print settings: ==================== 1. Print with supports both the drawer and the lid 2. 10% infill will work for both just fine. 3. Print with 0.16 resolution if you like things to look perfect and fit tight, its going to take longer but the overall look will be nicer in my opinion. How to install in the printer: ==================== Refer to the images, you will have to unscrew two bolts in one of the axis and untighten the belt so that the drawer will side inside the rail, refer to the relevant image i have attached on how to do that. This design was based https://www.thingiverse.com/thing:4605071 but brings many improvement.
Statistics
Likes
105
Downloads
0