BikeHanger
Description
I designed a bike hanger, which can be used for small places. The hanger allows you to rotate the bikes so you can chose yours or the desired one without taking others off. I printed it on Creality CR-10S, for 2 parts (Arm 1 and 2) you need to have printing bed 30x30. I printed the STL with next configuration: [Layer, WallLines, Top/Botom, Infil] Arm1 - 0.3, 5, 3, 20 Arm2 - 0.3, 5, 3, 20 BottomWheel - 0.3, 3, 3, 15 CableHolder - 0.1, 5, All, 100 Joint - 0.3, 5, 3, 35 WallBracket - 0.3, 5, 3, 35 Everything with support. Then you would need a steel cable 3mm. Which connect from arm to CableHolder. Also Arm2 have holes for cable, if you need extra support. Bolts for one hanger: 2x M6x60 (Socket cap) 1x M6x70 1x M10x150 Wall screws: 3x M10 (Length depends quality of wall) 1x M6 (BottomWheel) For Joint, WallBracket and CableHolder I used a PTEG, just for sure.
Statistics
Likes
9
Downloads
0