GoBo - (Nitrile) Glove Box (Case)
Description
# Nitrile Glove Box for german "Element System" Peg Board System You will need some metal profile (I had aluminum) for the frame (25x2mm) - and bend it to give the bottom stability. Please see the pictures. Additionally, 4x 6mm holes required. Fits snug to the peg board. Isn't super rigid, however a fairly light (less material), quick print and individually adjustable (mounting higher/lower). The glove box is held in place by gravity and thus moves slightly when used. With a slight squeeze in the back, fits boxes up to 90x126mm on the short end. Height... "open": The blue demo box is 240mm long/high. You'll need 4x "knopf" - that's the/a little plug that snaps into place. Enjoy.
Statistics
Likes
26
Downloads
0