Helping Hands Mount for PanaVise 315 324 333
Description
Mount for articulating arms that fit onto a PanaVise 315 (324/333) Circuit Board Holder. The mount onto the PCB plane so your arms will rotate as you manipulate the board. These mounts were designed to work with giufini's "PCB Workstation XL with Articulated Arms" system. So you can utilize arms you've printed from that project as well as the various attachments to mount alligator clips, test clips & probes, etc. https://www.thingiverse.com/thing:2427726 Designed in two orientations to best fit your needs. There is a slot to run a test wire through the arms as well. Uses an M5 sized set screw - use a real screw or print your own. If using a printed screw, I recommend "tapping" the thread with a real M5 screw first if you have access to one. If your printed screw won't go in, try printing it just a bit smaller, maybe 95-97% scale, it may work better.
Statistics
Likes
1
Downloads
0