MagSafe IKEA Nordmarke Wireless Charger
Description
This is a 2 part replacement casing for the IKEA Nordmarke wireless charger that allows a magnet array to be fitted making it compatible with MagSafe iPhones. Parts required: 0.5mm x 3-4mm neodymium magnets (at least 50) Clear tape Instructions: Print parts - make sure your printer is well calibrated as these parts are thin! Place the top disc on the back of your iPhone (secure temporarily with tape) and start placing magnets in the circular recess. See picture for details - there are two concentric rings of magnets with opposing poles facing out, so you will need a steady hand and careful placement to get as many magnets in as possible. Secure magnets in place with clear tape and remove disc from the iPhone Disassemble existing charger using a screwdriver head to unclip the existing case. Clip the new case in place. The silicone cross should protrude substantially further than before as the new case is thinner on top. Press the magnet disc into place on top of the case, lining up the LED. The silicone cross should hold it securely in place. Done! Your iPhone will align itself with the charging coil with a satisfying clunk from now on.
Statistics
Likes
2
Downloads
0