GoPro Hero 5 Lite Frame
Description
GoPro Hero 5 Lite Housing I designed it to work with standard GoPro mounts and to use it mainly on quadcopters. I attached the buttons with the little metal piece to the camera lens, as you can see on the pcitures. Included is an access for the SD card and access to the display connector. For power I tried using the TBS USB Type-C Power Cable which I connected to a Matek Micro BEC 5V. This didn't work well as the camera detects it for data management. Therfore I had to built my own cable. I just used a USB Type C cable, stripped the wires. Bridged the data lines (white & green) with a 4.7kOhm Resistor. I then connected the Matek Micro BEC 5V to the black and red wire. This worked fine. If you want something changed leave a comment and I will try to implement it.
Statistics
Likes
8
Downloads
0