Tevo Tarantula Pro BLTouch/3D touch mount with strain relief
Description
The Tevo Tarantula Pro X carriage and Hotend mount are excellent, but some kind of strain relief on the cables is missing, and this ended up breaking my thermistor cable. Also, I currently have a Triangle Labs BLTouch (3D Touch) installed with a 16.5mm spacer. So, inspired by the design of bitby3r [1], I made a BLTouch mount with a strain relief. There are two versions: 1 - With holes for M3 nuts, if you want to screw the BLTouch in the mount and then screw in the X Carriage. In this case, you will need: 4 M3 nuts, 2 M3x10mm, 2 M3x8mm 2 - Without holes for the nuts, if you want to use a single M3 screw to secure the BLtouch and the mount. In this case you will need: 2 M3x30mm PS .: Both versions are 16.5mm high (the spacer part for the BLTouch) Offset NOZZLE_TO_PROBE_OFFSET { 0, 20, -1.45 } [1] https://www.thingiverse.com/thing:3742648
Statistics
Likes
12
Downloads
0