Creality CR-10S Pro BMG Direct Drive
Description
It is an overlay for the original stroller without any modifications. There are two versions to download - reinforced for lateral movement and the normal one with more space for wires from the hotend. Design inspired by the ender project adapted from scratch to the CR-10S Pro. A turbine 5015 was used to cool the print For the heat sink, I used a 40x40x10 fan alone or you can use a ready-made cover with a 30x30 fan The BMG Extruder requires longer M3x40 screws 2 pcs and one M3x45 for the fan base Everything is tested and works properly.
Statistics
Likes
6
Downloads
0