IKEA MALM drawer repair (no screws inside)
Description
Fix slipped out floor of IKEA malm drawers. Requires 5mm wood drill and short screws (<15mm length). Remix with these improvements: - Using 5mm plastic stud instead of screws to grab into the drawer’s floor. It’s only required to pull it back into its notch. - Moved screw holes for back side fixation a little lower since they were on the exact same height as the notch - Smaller (only 4.6cm wide) to print faster Downside: - requires supports Remix designed with blender. Blend file attached.
Statistics
Likes
3
Downloads
0