Parametric handlebar support for GoPro quick mount (or whatever else)
Description
[UPDATE] Add new top support mounted on 3 flexible pins to avoid vibration. [/UPDATE] Parametric model for Fusion 360 to print a GoPro support for mounting the camera on the handlebar. It is possible to change all sizes, just be sure that you keep enough spaces to pass screw and nuts. The Quick mount for GoPro has to be oriented on the support with an angle of 18°. I putted double face tap between the top part and the quick mount, and I glued the screw after tightening it. The STL models are designed for Duke 390 handlebar: diameter = 22mm, width = 20mm, thickness = 4mm. I used M4 Allen head screw, 40mm for the support and 20mm for the central hole between the top part of the support and the quick mount. Infill: 50% for hardness.
Statistics
Likes
6
Downloads
0