60mm Radial Fan Boot Dryer - USB Powered
Description
This is a design for a boot dryer which uses 60mm radial fans which are typically 5V powered, and can be used with a standard USB power supply. This design was originally designed to work with USB battery banks for drying boots, wet clothing, and other gear while traveling. *** ##Revisions: Revision 01 - Initial Release - November 28, 2020 *** ##Bill of Materials: + 6X - M3X16mm Flat Head Screws + 1X - 60mmX10mm [Radial Fan](https://www.amazon.com/gp/product/B0821YC2NW/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1) + 2X - M3 Hex Nuts + 2X - Small Zip Ties (Used for strain relieving) *** ##Print Settings: + Material - PETG, ABS, or PLA + Perimeters - 3 (with 0.4mm Nozzle) + Supports - Not needed + Infill Percentage - 30% + Layer Resolution - 0.2mm *** ##Additional Details: + STEP File has been included so that modifications to the original model can be made easily. + This was designed in SolidWorks. + For additional airflow, thicker fans can be used with this design.
Statistics
Likes
11
Downloads
0