Ender 3 Spool Holder Wall Mount
Description
I needed to mount my filament spool to the wall, so I designed this mounting plate to be used in combination with the standard Ender 3 metal spool holder. A quick print that took about 1hr 45mins at 50mm/s. Beware of warping however as while it isn't detrimental to the final result, it doesn't look great and if bad it could affect the integrity of the part! If there are any issues, please let me know! 1. In order to attach the Ender 3 spool holder to the printed part, use the standard hex screws and t-nuts that are usually used to attach the spool mount to the printer - make sure you do this before mounting it to the wall! 2. The holes to mount the piece to the wall are 3.5mm in diameter, so bear this in mind when choosing your screws; if you need the holes widening give me a shout! 3. Mount to the wall as you would any other thing - make sure to use strong wall plugs. It is surprisingly sturdy! If printed and mounted correctly it is really quite strong. That being said, I can't take any responsibility for any damage caused while using it!
Statistics
Likes
8
Downloads
0