Nerf Rival Kronos Plunger Seal Shim
Description
Plunger Head Shim for Nerf Kronos / Heracles (and possible other Kronos reshells) Place this shim on the plunger head underneath the O-ring for a tighter seal. Same concept as the oldschool teflon tape wrapping method to tighten seals; but more permanent -I've had issues with teflon tape squishing out of place. SML variant doesn't stretch the O-ring as much. use if the tighter seal adds too much drag and becomes a detriment to fps. Plunger Fill Spacer: the Kronos Plunger Tube has a very slight Taper at the front; This narrow area can damage the O-ring seal if using the Above Shim to get a tighter fit. Therefore, must press fit this shim into the bottom of the plunger tube to block the plunger from entering Tapered section. Sacrifices a few mm of air volume, in exchange for Seal Durability. Warning: may need to remove Ratchet Lock from blaster after shimming, depending on spring/spacers used. Impact resistant material recommended; such as high durometer TPU.
Statistics
Likes
1
Downloads
0