Anycubic Mega-S printing Profile
Description
This is my Cura profie for my AnyCubic Mega-S I had some issues with the standard setting. Especially with Corners, Tolerance and Top Layer finish. I tried the new Marvin Firmware update but this did not solve the issues. I also tried different Cura Profiles available for download but still hat some issues that. At the moment I am running my printer with the standard firmware, and TCM2208 V2.0 DIY Stepper drivers installed, because of the noise. Changed the Hardware wireing for the motors to change the direction. But I think this should have no influence on the quality, if you don't has this modification. This profile is designed for Terrain printing for Miniature Games. Printer settings: Layer Height: 0,2 mm Nozzle: 0,4 mm Firmware: original, or Marvel You can modify following: Wall Line Count: 1 or 2 (not more! This will have a bad influence on top finish) Extra Infill Wall Count: 1 or more (If you want stronger pats) Top Layer: 3 or more Bottom Layers: 3 or more Following should have no influence and you can choose Infill Density: Infill Pattern: Supports: Build Plate Adhesion Type: Print Sequence: 29.11.2020 V2 Did a small update on the profile. 07.02.2021 Have seen some issues with the import of the Cura profile, not all settings were imported right. So I added a Screenshot overview of the settings. 14.05.2021 V3 A few changes were made thanks to Zoromer and Krolbren Temperatur 205 Retraction Distance 5 Retraction Speed 25 Acceleration 200 01.08.2021 Exerptus Cura 4.10. V1 Profile adjusted to Cure 4.10. reduces stringing tested with Sunlu PLA Gray Thanks to Kuehmayer for a lot of help. https://www.thingiverse.com/kuehmayer/designs Thanks to Zoromer fo a lot of help. https://www.patreon.com/zoromer
Statistics
Likes
46
Downloads
0