PI Camera Support for 20MM Rail (Holes for Dorhea PI Camera)
Description
Simple design Raspberry PI camera mount for the 20 MM extrusion rail of most budget 3D printers. Each part prints in ~1 hour or less. Depending on the desired configuration, needs: * 4 to 6 M3x8 screws, * one M3x20 screw, * 2 M3 T-nuts, * 3 to 5 M3 nuts, and * 4 to 7 M3 washers. * Plus some string or insulated wire to secure the camera to the swivel. There are two stl files named reupload. I had reports that the originals were corrupt and wouldn’t open. Hopefully the reuploaded files will work. It's so simple to print even I could do it, please post makes! :)
Statistics
Likes
6
Downloads
0