KiNG Sunlu S8 Direct Drive Extruder DMG Edition
Description
Dual Metal Gear (NOT BMG) Direct drive reusing the stock fan shroud. Wire bracket: https://www.thingiverse.com/thing:4559502 This was designed with no supports in mind, the zip tie slot is 4x2.5mm you should be able to bridge that. Hardware List! Motor bracket: qty 3: M4x12/14mm with washers/nuts it's very snug. Motor mount: Stock screws work. I recommend a .4/.6mm nozzle and .25mm layer height to retain accuracy of dimensions. I'd also suggest using PETG with at least 25% gyroid infill. If you find my parts helpful, please consider donating to continue my research and progress in my projects. Paypal: Mike.king.2590@Gmail.com Venmo: @Maikumizu Cashapp: $Maikumizu
Statistics
Likes
7
Downloads
0