Raise3d N2/+ Filament Runout Sensor Housing
Description
Alternate filament runout sensor housing for the Raise3d N2/Plus. The original one included hides the LEDs and the logo is not displayed. With my design, the bottom part can be removed. Parts I Used: Threaded inserts 2- M3 4mmX5mm 2- M4 6mmX6mm https://www.amazon.com/gp/product/B07L96KVP3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Hex Bolts: 2- M4 X 16mm https://www.amazon.com/gp/product/B07L96KVP3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Tape: I used VHB tape https://www.amazon.com/gp/product/B0789GKLHJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Tubing: TECBOSS Bowden Tubing https://www.amazon.com/gp/product/B07QNJMFKP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Not shown is a picture on how to mount. I put 2 pieces of tape from top to bottom on the flat part of the top tube connector. I then stuck it to the inside lip similar to how the original was stuck on. I made sure the bottom of the top tube connector is parallel to the bottom lip of the printer so the sensor housing dangles out the bottom.
Statistics
Likes
0
Downloads
0