PHROZEN Mini 4k Vat Drip holder
Description
I have printed this and tested. The height of this print is about 370mm whcih exceeded most printer capability, therefore it has a joint in the middle so we can split into 2 sections. Please print the main part (base and top) vertically with support for the top part. Please apply super glue or epoxy between the joint to ensure that it is stable. I have used 1/4" bolt and nuts for this print, for bolt, please use at least 4cm or longer. The reason I didn't design the bolt wit the knob which I normally do is because I do not want a chance the the bolt could screw into the Vat PEF and damage it. Please use Epoxy to glue all the metal parts into the print for permanent use. You can make adjustment up and down, and what makes this design better than most others is that, I have designed a gripping mechanism to make the hold very very stable, there is no chance that it can slip down during operation. Another thing that makes this holder excellent is that, the vat holder is designed in slight angle to allow all the liquid to be dispensed. ps. the mesh filter is bought from ikea https://www.ikea.com/au/en/p/riklig-teapot-glass-60297847/ Good luck. If you happy with the design, please donate on the left. as little as $1 could make me happy, just a gesture of your support. Vat cover is coming next. So what you need is: 1. 2 x 1/4 inch Bolt (at least 4.5 cm long) 2. 2 x 1/4 inch Nut 3. ikea filter from the RIKLIG teapot (https://www.ikea.com/au/en/p/riklig-teapot-glass-60297847/)
Statistics
Likes
46
Downloads
0