Three 5015 fan hot end cooler for Ender 5 Pro with drag chains
Description
My first intention with this design was to produce a more efficient cold end shroud that would allow me to use a buck converter and 5015 fan to reduce the noisiest part of my printer. This worked really well and at 12 volts the fan is much quieter than the standard part, while still cooling the heat sink properly. The two 5015 part cooling fans can also be run at slower speeds while producing much better cooling compared to the original parts. I also wanted to design the shroud and ducts to provide better visibility of the nozzle. This also allows you to get a spanner around the hot end to support it while changing a nozzle. Finally, I integrated drag chains and a support for the x axis gantry for better cable management. I am also working on a support for y axis drag chains and will update this when I have all the kinks worked out. Parts to print: 1x Cooling_Duct.stl 1x Shroud.stl 1x Mounting_Plate.stl 1x Carriage_Chain_Mount.stl 21x Chain_Link.stl 21x Link_Cover.stl 1x Gantry_Chain_Mount.stl 1x Gantry_Chain_Support_Left.stl 1x Gantry_Chain_Support_Right.stl Hardware: 6x M3 8mm socket head bolt 8x M3 12mm socket head bolt 4x M3 16mm socket head bolt 12x M3 nut 4x M3 t-nut (printed is fine) 3x M4 20mm socket head bolt 3x M4 nut Other parts: 3x 5015 fan 1x buck converter 1x BL Touch
Statistics
Likes
17
Downloads
0