6" Rack Pi 3 cabinet w/ 4010 blower
Description
Horrible tinkercad edit of this model (https://www.thingiverse.com/thing:2084736 in case the remix function is broken). All it does is cuts a bit out of the lid and rearplate of the original model. There are two rearplates, the difference being that the one with HDMI has a rectangular cutout for a cable to pass through. It's a tight bend, but doable. This model also sacrifices one screw on the rearplate. I recommend a .1mm or finer layer height for the ramp to give the air from the 4010 blower fan a smoother path. I am well aware that the model will need supports. I am also well aware that the supports may break the ramp is you remove them harshly. There isn't a whole lot I can do about it, partly because I am awful at CAD, partly because the I/O of the pi is in the way, and partly because I discovered a better model for cooling Pis in this case (https://www.thingiverse.com/thing:2954775). I have little to no intentions of fixing anything about this model because I myself am calling this thing deprecated the second I publish it. If anyone uses this, be aware that the 4010 blower may get louder after a few weeks. I don't know why, but if anyone does know, please let me know.
Statistics
Likes
0
Downloads
0