18650 Cell (Battery) Holder Solderless
Description
Easy Set Up: 1. Print 2. Feed two nickel strips through the holes 3. Connect your charger (I am using the iMAX B6AC V2) No soldering needed. The "springs" don´t break easily and work with PLA. IMPORTANT: Unless you are charging with a balance charger: Check if any of the cells are getting hot (You can touch them and if one is noticeable warmer then the rest you found your bad cell). Take the bad cell out and recycle. If you have one bad cell the other´s most likely won´t charge up to 4.1 Volts - depending how bad the cell is.
Statistics
Likes
14
Downloads
0