Prusa MK3S / MINI / 3030 Profile - Stands
Description
<h3>Stands - RC-1 - 26 Januari 2021</h3> Updated the stands so you do not need support anymore, it was an initial design to use thiccccccc rubber pads as inserts. now you can the stands/feet print without support or if you want the texture of the powder-coated pei sheet you can print it on its side without support. Prusa MK3 and MK3S Stands, or other 3030 Profile Stands Print them sideways so you see the sexy Textured PEI Sheet look, but it's your choice! Print 3 small ones and 1 big one for Prusa MINI print 4 or 6 small ones for the MK3S Hardware Needed: 4x M4x16 Hex Bolts 4x M4 T-Nuts for 3030 profiles ** 4x M4 Square Nuts / Block Square Nuts (if you don't have T-Nuts) If you do not have M4 stuff... M3 is ok too. 4x M3x16 Hex Bolts 4x M3 T-Nuts for 3030 profiles ** 4x M3 Square Nuts / Block Square Nuts (if you don't have T-Nuts)
Statistics
Likes
5
Downloads
0