MEGA Titan for Anycubic I3 Mega E3D V6
Description
This is an improved Version of my Midnight Project, to improve Direct Drive Version of an Titan Extruder by E3D for Anycubic I3 MEGA or MEGA S. With V6 Hotend ! IT´s AWESOME ! !!!!! With front mounted Steppermotor !!!!! So this means: Use Metalplate from Anycubic is necessary It dosen´t matter if you use a stock steppermotor or a slim one like I do, because it is front mounted. To have the necessary space to the endstop. Use the fan_endstop braket. Hell yes I know the Cable Management is terrible, but maybe there is someone out there who have some Ideas to solve that ? Post it :-) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Improvements: *faster Speeds and Movements are possible *mount directly to the Metal plate *new PCB holder *new belt mount ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Speed Settings in CURA 4.7.1: Outer Wall Speed 30 mm/s, acceleration 800. Inner Wall Speed 60 mm/s, acceleration 1500. Infill speed 80 - 100 mm/s (it depends), acceleration 3000. Default printing speed 60 mm/s, default acceleration 3000. Travel speed 200 mm/s, acceleration 4000. Top/Bottom Solid fill speed 30 mm/s, acceleration 3000. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Some Info regarding printing and Material. I use ASA or ABS to print parts for my printer e.g. Printhead or simmiliar. Part FAN can be used from: https://www.thingiverse.com/thing:4361102 or this one: https://www.thingiverse.com/thing:3710090 Hotend Fan: Use standard 30x30 12V Fan with clip like this one: https://www.amazon.de/DollaTek-L%C3%BCfterabdeckung-L%C3%BCfter-Drucker-Zubeh%C3%B6r/dp/B07DK2KVLL/ref=sr_1_21?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=3030+l%C3%BCfter+hotend&qid=1607179565&sr=8-21 Stepper Motor with extruder: https://bit.ly/2JHaYv7 Printing Instructions: Every Parts you print in ASA or ABS or simmilar Filament that tends to warp, use a bigger BRIM or RAFT !! I would like to see your makes or remixes :-) To get easily rid of the annoing Supports, go and set the following:
Statistics
Likes
6
Downloads
0