Multitool Drill Stand Tuning
Description
I designed a holder [3141565](https://www.thingiverse.com/thing:3141565) for my Dremel clone for mounting it onto my table. More and more I realized that it is necessary to create exact holes on defined locations which is not possible by making this by hand. I bought the inexpensive drill stand [Donau Elektronik 0510](https://www.conrad.at/de/p/donau-elektronik-bohrstaender-arbeitshoehe-max-30-mm-817771.html) by Conrad, it is also available from other shops. This tool cannot be used with my drill tool with a diamter of 48mm, because the screws of the stand are too short and the holder is not very stable. Therefore I designed a new holder for this tool which makes it more stable and I added also a base with a sink which allows drilling through the workpiece. In addition also 3 brackets can be used for fixing it onto a table. The 2 new parts are displayed in violet color on the image. As an extra screw and a nut is required for mounting the machine I took that from the holder [3141565](https://www.thingiverse.com/thing:3141565). This holder only supports a tool shaft diameter of 48mm (practically ca. dia 46-50) for mounting. Update 2021-01-14: Version 2 - Clamping screw moved to center. Wrong base files replaced by correct version. Update 2021-02-06: Added a 48mm adapter for thread mounting to increase work level height.
Statistics
Likes
8
Downloads
0