CNC Enclosure made from Speaker Box
Description
This thing contains the files needed to be printed to hold a door on a speaker box enclosure for a 3018 CNC machine. The door is made out of a 15 inch circle cut out of 1/4 inch plywood. The plywood is then covered in some self adhesive carpet panels to further dampen the noise. The large brackets fit on the bottom of the hole and the latch attaches high up on the side and is used to keep the door closed. The brackets are just held on with some screws. This also has a box to be added to the outside of the speaker box enclosure to hold the speed controller for an ER11 Spindle. The controller box has build in supports so it should be able to be printed without additional supports. Self Adhesive carpet panels: https://www.walmart.com/ip/Achim-Nexus-Self-Adhesive-Carpet-Floor-Tile-12-inches-x-12-inches-Smoke/630607688?wmlspartner=wlpa&selectedSellerId=0&wl13=5152&&adid=22222222227271024593&wl0=&wl1=g&wl2=c&wl3=324858123748&wl4=pla-610025476263&wl5=9031040&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=630607688&veh=sem&gclid=CjwKCAiA_Kz-BRAJEiwAhJNY7-y_lr_j_wGWRFqhTD1QDf_8Bp_5ogHuLE4J2bOREYVAnCbm31E8ARoCig8QAvD_BwE
Statistics
Likes
11
Downloads
0