Resin Mixer
Description
my third iteration of a mixer optimized for very viscous fluids like resin. Made to fit and lock into a standard ¼" drill. Print Settings I used for test samples: 5 Walls 4 Top 4 Bottom 50 % infill .12mm Layer height 60mm/s speed (sliced with Cura) Print tested on Artillery Sidewinder X1. No support necessary, but I recommend using a brim to improve bed adhesion. Not yet tested in actual resin, I preformed all of my testing in a cornstarch/water mixture made to match a viscosity normal for Acrylic Resin.
Statistics
Likes
173
Downloads
0