[Ender_3] Control box

Description

Ender control box that will fit all the electronics. Ideas and feedback are welcome. :D Enjoy! ________________________________________________________________________ __Update:__ __04 Jan 2021:__ + added a frame to mount the C3D 1.1.3 board and other bords with the same layout + touch upon the design -> better printable __07 Jan 2021:__ + added mounting points for two additional components [30 mm x 16 mm] on the left side cover __22 Mar 2021:__ + widened the PSU tray + added continues rail for better customizable future parts + adjusted the angle of the LCD screen (from 115° to 111,5°) + redesigned the circuit board for the SKR 1.4 and SKR MINI E3 (C3D_v.1.1.3 ) + widened the port on the left panel for better access ________________________________________________________________________ __Parts needed for this Project:__ __Parts you already have:__ - 1 x LCD screen: Cerality3D LCD (recomended: BTT TFT35 v3.0) - 1 x Motherboard: Cerality3D V1.1.3 (recomended: BTT SKR v1.4) - 1 x Ender 3 LCD mount - 1 x 60mm x 60mm x 15mm fan - 1 x 40mm x 40mm x 10mm fan __Fans:__ - 3 x 60mm x 60mm x 15mm fan (recomended: 1 x fan in IO shield) __Wires:__ _Motor/Stepper:_ - 1x 4 pin X-Axis Cable Stepper Motor - 1x 2 pin X-Axis Cable Limited Switch Endstop - 1x 4 pin Y-Axis Cable Stepper Motor - 1x 2 pin Y-Axis Cable Limited Switch Endstop - 1x 4 pin Z-Axis Cable Stepper Motor - 1x 2 pin Z-Axis Cable Limited Switch Endstop - 1x 4 pin E-Axis Cable Stepper Motor _Bed:_ - 1 x 2 pin thermistor cable - 2 x 24V cable _Hotend:_ - 1 x 2 pin thermistor cable - 2 x 24V cable - 1 x 2 pin hotend fan - 1 x 2 pin part cooling fan __Screws:__ - 40 x DIN965 M3 x 10 - 12 x DIN965 M3 x 20 (60mm fan) - 4 x DIN965 M2.5 x 5 (Raspberry) - 2 x DIN934 M4 (Ender 3 LCD mount) __Nuts:__ - 60x DIN934 M3 - 2 x DIN934 M4 (Ender 3 LCD mount)

Statistics

Category

Tags