Northern hemisphere of Tellus Lamp
Description
Please meet the "Northern hemisphere of Tellus" lamp. It measures around 22 cm in diameter, 31cm of height and is a "push together" construction, desiged to give a modern touch and welcoming view. While it will take a while to print all parts, however, it is quite straight forward and assembly is easy as well. Furthermore, it is even possible to slice and print it as "single color tones" for those without a mmu. Please note that the print bed (for i3mk3 at least) is filled to a large extent during the shade prints. Clean the print bed properly all to the very edges before the print. Also, consider using the 7x7 mesh bed leveling (found within the settings menu). The lamp shade is ONLY available as .3mf files. I did this on purpose as the shade STL files would not only have flooded the directory, but been hard to setup for the print also. IF you REALLY want these files, please write a comment and I will add them later. This lamp was designed using blender, freecad-daily, gimp and inkscape. Please be aware that my designs are generally CC non-profit. Please respect this decision. Before you print this lamp, be sure to actually read the printing instructions.
Statistics
Likes
3
Downloads
0