Elegoo Smart Robot Car Pixy2 Cam Mount
Description
Camera mount for a Pixy2 camera on a Elegoo Smart Robot car Mounts to front of vehicle using existing screws from the line tracking sensor. (See photos) Printed on a Prusa i3 MKS3+ in PLA Sliced on Cura Print Settings: Layer Height 0.2mm Wall Thickness 0.8mm Wall Line Count 2 Top/Bottom Thickness 0.8mm Top Layers 4 Bottom Layers 4 Horizontal Expansion 0 Infill Density 20% Infill Pattern: Grid Printing Temp 200C Build Plate Temp 60C PrintSpeed 60 mm/s Enable Retraction Supports = Touching Buildplate Support Overhand Angle 50 Enjoy !
Statistics
Likes
2
Downloads
0