Anycubic Predator Extruder Mount for fixed Extruder Position
Description
Extruder and filament sensor mount for the stock extruder and filament sensor of the Anycubic Predator. Normally the Predator has a "flying extruder", which means the extruder is mounted with springs to the three carriages. Problem of this: Extra weight for the stepper motors and an always swinging extruder. Solution for this: Fixed mounted extruder and filament sensor on one of the three stands. Print Settings: 4 Walls 6 Top 6 Bottom 30 % infill 230°C nozzle temperature 70°C bed temperature 60mm/s printing speed 30mm/s printing speed for first layer and outer walls 100mm/s moving speed !!!!!!!! This thing is still in progress. I have to check some specs and measurements. First test prints are already running. I will upload the final STL-files in some days/weeks. Maybe a longer stepper motor cable or cable motor extension cable is needed. Maybe also a longer filament sensor cable or extension cable is needed. Required: (Will change maybe) Flat head screw: 2x M5x20mm 2x M4x25mm Normal screw: 3x M5x20mm 3x M4x10mm 2x M3x12mm Nuts: 5x M5 5x M4 2x M3 1m PTFE tube Enjoy !
Statistics
Likes
2
Downloads
0