SKR V1.4 Turbo Fan Duct
Description
Designed for the BigTreeTech SKR V1.4 Turbo, for cooling down the drivers. Things you need: 1 radial fan 50x50 2 M3x40 screws (for the duct) 1 M3x20 screw (for the fan) 3 M3 nuts I designed 4 versions: * two @180° with the board and Right/Left side fan (it, apparently, works better and makes less noise); * Two @90° qith the board and Right/Left side fan.
Statistics
Likes
10
Downloads
0