Anycubic Predator Upgrade: top cover bowden tube plug
Description
Hi. This is a plug i created for the Anycubic Predator top cover. In the top cover is a very big hole for the bowden tube. It always bothered me just simply from the looks of it. But i also dicovered that a lot of dust and dirt gets in there if you dont cover your printer or do very long prints. Under this cover are the electronics of the Predator. So i figured it would be nice to plug it so no more dirt gets in there then it already does. It's a very easy part to print with very minimal amounts of material and im my opinion it gives the Predator a more polished look. To install it on the Predator use a screw driver or anything stiff and thin to compress the sides of the plug. Be careful that you don't crack the plug and to not push the bowden tube out the bottom of your printer. Just push agianst it from the underside while installing the plug. It's a little bit fiddly to install but it works. UPDATE: I added a new type of Plug. It's much easier to install and the sides of the plug do not break so easy anymore. To install, just thread in the bowden tupe and push the plug down. Do not push the bowden tube out the bottom of your printer. Just push agianst it from the underside while installing the plug. Have fun printing and have a nice day. ;)
Statistics
Likes
9
Downloads
0