Shelly H&T Case (external Power Supply)
Description
This is a simple case for the <b>Shelly H&T</b> sensor. One Base is with mounting points for a step down module one is without them. Both come with a 4mm hole for a USB Cable. The Shelly H&T twists into the lid like in the original case As the Shelly H&T only is rated for 3V you should use some type of <b>voltage regulator</b>! additionaly needed: <ul> <li>4 2.9mm x 9mm screws for the lid</li> <li>2 2.9mm x 6mm screws for the step down module if used</li> <li>USB Cable</li> <li>Voltage regulator / Step down Module</li> </ul>
Statistics
Likes
11
Downloads
0