13" monitor frame
Description
Frame for the [13,3" 1920x1080 N133HSE-EB2 IPS LCD Monitor](https://www.amazon.de/1920x1080-N133HSE-EB2-LCD-Bildschirm-TFT-Monitor-Controller/dp/B071FZZQG9/). There are similar monitor models, but I could not test them with my frame. The housing is made to be mounted to a standard monitor attachment plate. In my version the DVI connector is blocked. **Print:** You can print this with your standard medium resolution. For me it`s 0.2 mm. Each frame part is needed twice, the connection rest four, the distant ring six and the clamp eight times. Only the connection rest needs support material. If you do not trust in your slicer, you can use the pre-supported variation. **Assemble:** 1. Connect the mirrored frame part to the unmirrored frame parts via the clamps. So you get a right and a left frame part. 2. Cut the material around two of the holes of the left half (the circuit bord will be mounted to the other half) as shown in the picture. 3. Test, if everything fits. 4. Carefully slide the monitor in the left frame 5. Slide the right frame on the monitor. This should work without heavy force. 6. Add the leftover Clamps to connect the right with the left side. If needed, you can fix them with glue, otherwise they should hold by press fit. 7. Screw the circuit bords on the frame with M3x10 screws and the distant rings. Connect the cabels. 8. Glue the connection rests on the frame. Screw a Monitor Plate on it.
Statistics
Likes
1
Downloads
0