Whiskey Barrel - No Bottom (flip to print)
Description
## Key Points: Print barrel upside down (lid on bottom, open on top) I resized to 30% scale for my prints. ## Description I wanted to make a barrel tree for the holidays, using a wood infused PLA I was able to. This was a barrel I designed in Fusion 360 early this year, I repurposed it for this project by removing the "lid" or bottom of the barrel so that I didn't need to fill the inside of the barrel during print. Basically I printed the barrels with supports (stringy lid if you don't). Remove the supports around the base and the lid and sand/cleanup for use. I then dipped the barrels whole into a wood stain, shook off excess and then let them dry. ## Filament Details Pla Wood Filament Wood Filament 3D Printer Pla Wood Fill Pla Wood 1.75mm, Rohs Compliance, 1 kg Spool, Dimensional Accuracy +/- 0.03 mm Pla Wood Color Extruder temp 207c and bed 60c Results can be seen at: https://collectorofjack.com/3DPrintedBarrelTree
Statistics
Likes
3
Downloads
0