Shelf Bracet Organic
Description
Print with holes facing down - for full strength 17.5cm shelf depth (or more) 16cm height 5cm width 13,5cm between holes Use double side tape or glue to mount shelf Countersunk screw head, 9-12mm in diameter at its widest point. Keeps the bookshelf without problems. I recommend using 20-30'C higher temperature for better layer adhesion and greater strength. It is worth increasing the width of the infill line to 0.5 or even 0.55 (over extrusion), it increases durability without affecting the appearance. However, you need to adjust the speed so that the nozzle has time to heat the material. 0.2 layer height 20-40% infill 2-3 walls
Statistics
Likes
1
Downloads
0