Neewer Microphone: Shock Pop Filter Mount
Description
Tired of having the pop filter bendy arm moving around, i tried printing the hook by DinoSuarez, but it didn't fit snuggly, and the popfilter was sitting too high for my Neewer NW800. Used it as the base for my own remix, and made one that fits my requirements. The hook is thicker, snaps in place with a little triangle tooth, and sits lower on the shock mount. It's very snug and doesn't wobble too much. Due to the new shape supports are required. The popfilter, arm and microphone are all part of a Neewer kit, but you might have some luck even with others, since chinese manufacturers usually sell under different brands. Due to the snap-in design should be suited even for an upside down mic mount. Beware that in order to install it you need to unscrew the bendy arm from the popfilter and with a pry tool widen the gap / undo the clips next to the hole to extract it.
Statistics
Likes
2
Downloads
0