Light-up Dumpster Fire 2020
Description
This model creates dumpster fires with a ~70x42mm footprint. They're just the right size for Christmas ornaments or desktop decor. The original was modified for reduced assembly time and LED-light capability. The dumpster has a slot for CR2032 coin cell (bios) battery. A jig is provided to align the hole for LED placement. To turn on the light, the fire can be inserted so that LED leads will contact the battery and illuminate the fire. To turn it off, simply remove the fire, spin it 180degrees, and drop it back in Printed in PLA, 20% infill, in batches of 9 units. Various colors. No support. Translucent or natural works best for fire. (Scale Fire and Casters to 99-99.5% and Hinge to 100.5-101%, for best results with some printers.) (This is a Remix of Dumpster Fire by COMSECFOR (https://www.thingiverse.com/thing:4496218) Model modifications - Combined sleeve with dumpster - Added CR2032 Battery holder - Added a ledge at the front of dumpster on the inside, to hold the fire straight/level in the dumpster. Additional STL: - Created jig for drilling hole in bottom of the fire to accomodate a 5mm LED bulb. When inserted/glued into the hole, if aligned correctly the leads will be aligned with the battery when the fire is inserted into the dumpster. (The jig is designed to drill the hole just below the tallest spire of the fire for extra depth, however it should work in any orientation.)
Statistics
Likes
7
Downloads
0