Spool Holder Parts Prusa I3
Description
Simple And Strong Spindle Holder. I Wanted Something To Carry My Two 1Kg Spools Without Stressing The X Axis Supports. Total Material Used: ~25G Of Black 1.75Mm For All Parts At 20% Infill Parts Needed: 1 Spool (About 17G Of Pla At 20% Infill) 2X Spindle-Mount 2X 8Mm Joint 2X Spindle-Cone2 12X 8Mm Or 5/16 Nut 2X 135Mm (5.3") 8Mm Or 5/16 Threaded Rods 1X 245Mm (10") 8Mm Or 5/16 Threaded Rod 4X 8Mm Or 1/4" Washers (1/4 Inch Fits Better Than The 5/16 Washers) 2 Spools (About 25G Of Pla At 20% Infill) 2X Spindle-Mount 2X 8Mm Joint 4X Spindle-Cone2 14X 8Mm Or 5/16 Nut 2X 135Mm (5.3") 8Mm Or 5/16 Threaded Rods 1X 245Mm (10") 8Mm Or 5/16 Threaded Rod 4X 8Mm Or 1/4" Washers (1/4 Inch Fits Better Than The 5/16 Washers)
Statistics
Likes
4
Downloads
0