PB Swiss Tools PB470 Adapter Grip
Description
This is a grippy sleeve for the PB Swiss Tools PB470 5mm hex to C6 bit adapter. It allows you to use the adapter as a finger bit holder to finger-tighten things that are hard to reach or just need a lot of finger control. All while still being able to use it with a 5mm allen key. The sleeve is friction-fit and sits very tightly. I had to use a hammer. The bore diameter is 10.2mm and the adapter is 10mm wide. I printed it in PLA with 100% infill. Might also be interesting to use a medium to low flexible TPE filament. You may tweak it to your printer's tolerances in Onshape. Just change the `bore_diameter` variable. https://cad.onshape.com/documents/e527a342a8b8bb7b373990d3/w/38604c83c23ad3a10ce4e4fa/e/f0ac535376fd7c6e89d36eeb
Statistics
Likes
9
Downloads
0